Wideband Lambda Controller for iTronix

Compatible with Bosch LSU 4.9, Bosch LSU ADV, and clone LSU 4.9 sensors

1x Programmable Analog Output, 10-20 AFR to 0-5Vout linear output

Output Sequencer provides a dual-level precision voltage signal to the Linear Output. This allows you to easily check that the AFR/Lambda seen by any device connected to the Linear Output is accurate, and if not, to generate a 2 point calibration to achieve perfect accuracy

10ms response time, high accuracy and noise immunity

1x Programmable simulated narrowband output

Maximum Lambda range of 0.6[Lambda] to 3.4[Lambda], equivalent to 8.82[AFR] to 50[AFR] for gasoline

%O2 range: 0% to 21%

Lean Burn mode for lean burn applications

The device will wait for the Oxygen sensor to be heated to 350°C by engine exhaust gases before heating up the sensor. By default, this is not enabled, it can be via UART command

Does not require Free Air Calibration

Sensor Heater Status LED Output allows the tracking of sensor temperature

2.4m cable length

Operating Temperature: -35°C to +105°C

Water and dust resistant